咸阳摩托车科四英文题

1. What kind of harmful effect will be brought about by continuously using the foot brake on a long downhill road?

A. Shorten the engine¡¯s service life

B. Make the driver feel tired

C. Easily cause the vehicle to overturn

D. Reduce the braking efficiency

Answer: D

2. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle infront refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

3. What is the meaning of this sign?

A. No left turn

B. Leftt and right turn

C. No leftt and right turn

D. No right turn

Answer: B

4. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: C

5. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

6. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

7. What should be done by the driver who intends to overtake but the motor vehicle in front neither reduces its speed nor allows the right of way?

A. Continuously sounding the horn and accelerating to overtake

B. Accelerating and continuing to overtake

C. Refraining from overtaking

D. Following the vehicle in front closely and finding a chance to overtake

Answer: C

8. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

9. What is the meaning of this sign?

A. Intersection

B. Ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

10. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

11. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

12. When the tire pressure is too low, what will happen if the tire changes its shape in waves and increases in temperature due to fast movement?

A. Unstable tire pressure

B. Even lower tire pressure

C. Driving resistance increases

D. Tire burst

Answer: D

13. When an erosive material catches fire, it should not be put out with water cannon.

Answer: Y

14. What is the meaning of this sign?

A. Watch for pedestrians

B. Watch for children

C. School area

D. Crosswalk

Answer: A

15. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: D

16. Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?

A. Front and rear fog lamps

B. Low-beam

C. High-beam

D. Hazard lamp

Answer: B

17. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

18. What is the meaning of this sign?

A. No passing

B. Driving at reduced speed

C. Time limit for entering

D. No entering

Answer: A

19. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

20. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: C