凉山州摩托车科目四英文版电子题库

1. When an erosive material catches fire, it should not be put out with water cannon.

Answer: Y

2. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A

3. What is the meaning of this sign?

A. No yielding

B. Yield while crossing each other

C. Reduce speed and yield

D. Stop to yield

Answer: C

4. How should a motor vehicle follow the other vehicle In front when driving on a road covered with ice and snow?

A. Keep a long safe distance

B. Turn on hazard lamp

C. Change between high-and-low beam alternatively

D. Sound the horn in due time to give a notice to the vehicle in front

Answer: A

5. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

6. When a motor vehicle encounters an accident, the driver should pay attention to whether there is fuel leakage, pipeline rupture, so as avoid accidents.

Answer: Y

7. What is the meaning of this sign?

A. Stopping temporarily is allowed

B. Long stopping is allowed

C. No long stopping

D. No stopping

Answer: D

8. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

9. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

10. What is the meaning of this sign?

A. Reducing speed 40m ahead

B. Minimum speed is 40km/hr

C. Axle weight limit is 40 tons

D. Maximum speed limit is 40km/hr

Answer: D

11. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

12. What is the meaning of this sign?

A. Bump road

B. High outburst road

C. Low-lying road

D. Hump bridge

Answer: B

13. What is the meaning of this sign?

A. U turn

B. Reversing

C. Left turn

D. Bypassing

Answer: A

14. What is the meaning of this sign?

A. Stop by the left side of the road

B. Downhill section left

C. Left turn only

D. Run by the left side of the road

Answer: D

15. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

16. When following other vehicles on the uphill section of a mountain road, what should the driver do if the vehicle in front stops?

A. Overtake from either side of the front vehicle

B. Stop close to the vehicle in front

C. Stop with a larger space from the vehicle in front

D. Sound the horn continuously to warn the other driver

Answer: C

17. What is the meaning of this sign?

A. No passing for small vehicle

B. Passing for small vehicle only

C. Passing for motorized vehicle

D. No passing for small vehicle

Answer: C

18. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and change to left lane

D. No going straight and no right turn

Answer: D

19. What needs attention when a motor vehicle drives on a road covered with ice and snow?

A. Braking length is extended

B. Anti-skating resistance will be greater

C. The adhesive force of the road will be greater

D. The braking length will be shorter

Answer: A

20. When rescuing a wounded person in coma, it is necessary to take warm-keeping measures to prevent heat loss.

Answer: Y