克孜勒苏州摩托车科目四英文版

1. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

2. When rescuing the persons who are losing blood, it is necessary to ______ first.

A. Observe

B. Dress the wounds

C. Stop bleeding

D. Inquire

Answer: C

3. What is the meaning of this sign?

A. Exit and entry for disabled people

B. Watch for disabled people

C. Rest area for disabled people

D. Special passage for disabled people

Answer: B

4. Once inflammable gas causes a fire disaster, it should be put out with water in good time.

Answer: N

5. At the scene of a traffic accident, once there is a leakage of toxic and harmful substances, people must be evacuated at the first time and alarmed immediately.

Answer: Y

6. When following other vehicles on a foggy day, what should the driver do?

A. Maintain a large safety distance

B. Turn on the high-beam

C. Turn on the low-bea

D. Sound the horn in due time

Answer: A

7. What is the meaning of this sign?

A. The lane for non-motorized vehicles

B. Yield non-motorized vehicles

C. No passing for non-motorized vehicles

D. Watch for non-motorized vehicles

Answer: D

8. When using splints, sticks or tree branches to keep the unexposed bones in position, it is necessary that these things should exceed the upper and lower joints of the wound.

Answer: Y

9. The article that cannot be used to stop bleeding by dressing is _________.

A. Bondage

B. Sling

C. Tourniquet

D. Hemp rope

Answer: D

10. Rescue personnel should check the breath of the unconscious person before applying any other emergency treatment.

Answer: Y

11. When discovering animals crossing the expressway on the highway, the driver should not drastically turn to evade.

Answer: Y

12. When encountering a vehicle in front ascending on a mountainous road covered with ice and snow, what should the motor vehicle driver do?

A. Ascend after the vehicle in front passes the slope

B. Overtake the vehicle in front swiftly and drive on

C. Overtake the vehicle in front with a slow speed and drive on

D. Follow the vehicle in front closely

Answer: A

13. What is the meaning of this sign?

A. Y-shaped intersection

B. T-shaped intersection

C. Intersection

D. Ring intersection

Answer: B

14. What should be done by the driver who intends to overtake but finds that the vehicle in front is also overtaking?

A. Following the vehicle in front closely and finding a chance to overtake it

B. Accelerating to overtake forcefully

C. Continuously sounding the horn to urge the vehicle in front to yield

D. Refraining from overtaking and letting the vehicle in front overtake first

Answer: D

15. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

16. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

17. The drivers, loaders and supercargoes responsible for dangerous chemicals transportation should all full understand the chemical characteristics, potential risks, features of the packaging containers and emergency measures for any unexpected accidents.

Answer: Y

18. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

19. What is the meaning of this sign?

A. No passing for small vehicle

B. Passing for small vehicle only

C. Passing for motorized vehicle

D. No passing for small vehicle

Answer: C

20. What is the meaning of this sign?

A. No yielding

B. Yield while crossing each other

C. Reduce speed and yield

D. Stop to yield

Answer: C