安顺摩托车科目四英文版app

1. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

2. What is the meaning of this sign?

A. Bypass from left side

B. Continuous curves

C. Sharp left curve

D. Sharp right curve

Answer: C

3. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

4. What is the meaning of this sign?

A. Hump bridge

B. High outburst road

C. Low-lying road

D. Bump road

Answer: A

5. When driving on a long downhill road, which is the best way to control the speed?

A. Coast in neutral gear

B. Take a low gear

C. Depress the clutch

D. Pull up the handbrake

Answer: B

6. What is the most frequent problem for driving on a muddy road?

A. High resistance force

B. Sideways slide

C. The motor vehicle bumps

D. Steering failure

Answer: B

7. What is the meaning of this sign?

A. No stopping temporarily

B. No long stopping

C. No stopping

D. Long stopping is allowed

Answer: B

8. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

9. How should lamps be used by the motor vehicle driver who follows a vehicle on a road section at night where he street light condition is good?

A. Turn off the headlamp

B. Use high-beam

C. Turn off all lamps

D. Use low-beam

Answer: D

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What is the meaning of this sign?

A. No U turn at intersection

B. No changing lane from both sides

C. No left or right turn

D. No going straight

Answer: C

12. What is the meaning of this sign?

A. Bump road

B. High outburst road

C. Low-lying road

D. Hump bridge

Answer: B

13. When rescuing a wounded person who has been poisoned by toxic gas, the first measure is to send him/her to a place with fresh air so that he/she will not continue to be poisoned.

Answer: Y

14. What is the meaning of this sign?

A. The lane for non-motorized vehicles

B. Yield non-motorized vehicles

C. No passing for non-motorized vehicles

D. Watch for non-motorized vehicles

Answer: D

15. What is the meaning of this sign?

A. Watch for long time honking

B. An unmanned level crossing

C. A manned level crossing

D. Multi-crossing of railway and road

Answer: B

16. What is the meaning of this sign?

A. No borrowing lane

B. No changing lane

C. No overtaking

D. No U turn

Answer: C

17. In emergencies, people¡¯s life safety should always be put in the first place.

Answer: Y

18. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

19. What is the meaning of this sign?

A. Watch for pedestrians

B. Crosswalk

C. Village or town

D. Primary school

Answer: C

20. When following other vehicles on the uphill section of a mountain road, what should the driver do if the vehicle in front stops?

A. Overtake from either side of the front vehicle

B. Stop close to the vehicle in front

C. Stop with a larger space from the vehicle in front

D. Sound the horn continuously to warn the other driver

Answer: C